ServicesList

7 Best Powder Coating and Electroplating Services in Singapore (2026)

Compare 7 Singapore powder coating and electroplating providers, from facades to hard chrome and anodising, plus tips on briefing a finisher.

By: Amir Wahab
Edited by: Amir Wahab
Published: 13 Oct 2026
Reading time: 5 min read

Powder Coating and Electroplating Services: a customer and a provider in a bright, modern setting

Powder coating and electroplating are the two finishing routes most people meet when a metal part needs to look better or last longer, yet the businesses behind them work very differently. Coaters bake a coloured polymer onto steel or aluminium, while platers deposit a metal layer or convert the surface chemically. This guide lists seven Singapore providers, three focused on powder coating and four on plating or anodising, each described from what its own website says. We give no prices and make no quality rankings. Use it to shortlist firms that handle your material, part size and finish, then request quotes and ask each one for its process details in writing.

1. Starcoat

Starcoat concentrates on architectural coating for aluminium, and its site sets out three service lines: PVDF coating, polyester powder coating and a faux wood grain finish applied to aluminium profiles by sublimation. The powder coating page describes an electrostatic process followed by high-temperature curing and lists uses such as wall cladding, roofing, louvres, railings and window and door frames. Its About page says the company was established in 2002 and lists ISO 9001:2015, ISO 14001:2015 and bizSAFE Level 3 among its certifications, which are the company's own statements. A catalogue page invites architects and designers to arrange a consultation to see wood and corten colour samples, and a project gallery shows completed residential and commercial facades. Enquiries use its contact form.

Tuas
Visit website ↗View on map ↗

2. KMS Industrial

KMS Industrial describes powder coating and liquid spraying as its principal business, serving electronics, life science equipment, computer casings and machinery. Its services page also lists phosphate pre-treatment, sand blasting, silk screen printing and testing, useful where a part needs preparing before coating. The company history on its site says it was founded in 1997 as a small paint shop and now operates from a factory building in Woodlands with multiple batch ovens, conveyor lines and a spray booth. It names semiconductor, marine, medical, oil and gas, electronics and defence among the industries it serves. A quote form and telephone number are on its contact page. The site footer shows 2021, so confirm current services.

Woodlands
Visit website ↗View on map ↗

3. Tech Coating

Tech Coating presents itself as a specialist in electrostatic powder coating, and its site lists epoxy, polyester and nylon powders. Its powder coating page names the kinds of items it handles, including bicycle frames, rims, outdoor furniture, sculptures, gates and railings, and it describes nylon powder as the finish used on many Singapore bus handrails. Beyond powder, the company says it also provides spray painting and paint refurbishing for machinery and furniture, either on site or off site, handy when an item cannot go into an oven. A swatch page shows its colour range. The site publishes an office number, an email address and a WhatsApp button, and lists weekday and Saturday office hours, so check before visiting.

Marsiling
Visit website ↗View on map ↗

4. VINA Specialist

VINA Specialist is a broader industrial services firm, known for rope access and height work, that also lists electrostatic powder coating as one of its services. That suits buyers wanting one contractor for several jobs rather than a dedicated coating plant. Its powder coating page says it coats mild steel, stainless steel and aluminium products with epoxy, polyester and urethane powders, and says it suits large fabrications, extrusions, electrical cabinets and weldments, for marine, oil and gas and general industrial customers, and takes small jobs as well as large ones. Contact details and a quote email link are published, and the footer shows 2026. Ask whether your item is coated in-house or arranged through a partner.

Tuas
Visit website ↗View on map ↗

5. Active Treatment

Active Treatment calls itself an electroplating and surface treatment provider since 2010. Its site lists aluminium anodising, hard black anodising, gold, zinc, electroless nickel, flash chrome and hard chrome plating, plus chromating, passivation, electropolishing, sand blasting and hairline buffing. It names semiconductor, medical, construction, defence and equipment manufacturers among the industries it serves. A quality page says the company holds an ISO 9001:2015 certificate covering the chemical plating process of metals and a bizSAFE Level 3 certificate, which are its own statements to verify. The site describes it as a sister company of Siong Kwong Industry and offers an online quote form, an email address and a telephone number. Its menu also links industries and blog pages.

Toa Payoh
Visit website ↗View on map ↗

6. AS Surface Finishing

AS Surface Finishing publishes a technical list rather than marketing prose that helps engineers name a specification when requesting work. Its homepage lists natural and coloured anodising to MIL-A-8625 Types II and III, zinc plating to ASTM B633, chromate conversion coatings, electroless nickel, passivation of stainless steel, electropolishing and chemical polishing, with each process tied to the standard the company names. It also mentions optical lens mould plating and a clean room with vacuum packing, which it describes as certified, a statement to verify with the firm. The site carries a 2026 copyright line and publishes an office number and sales and general email addresses, and it names technical and sales contacts. Its premises are in the Tai Seng industrial area.

Tai Seng
Visit website ↗View on map ↗

7. Toyo Chromium Engineering

Toyo Chromium Engineering focuses on hard chrome plating for engineering parts. Its website says the company was founded in 1987 and describes a one-stop service for strengthening metal components, with plating of hydraulic parts, impellers and cylinders alongside honing, grinding, polishing and metalizing. It lists shafts, piston rods, blow-off valves, actuator stems, moulds, screw rotors and spindles among the products it chrome plates and shows part-size bands up to 6 metres long. It names the marine, oil and gas, plastics and construction industries. Its footer cites ISO 9001:2008, an older edition, so ask for current certification. A sales email and telephone lines are published. Its pages group work for big parts, small parts and the plastic industry.

Tuas
Visit website ↗View on map ↗

How to choose

Start by naming the base material and the job. Aluminium facade panels, mild-steel gates, stainless components and hydraulic shafts call for different providers, and a firm that coats architectural extrusions may not plate engineering parts. Ask each shortlisted business to confirm in writing that it handles your material and finish.
Check how big and how many. Powder coaters work with oven and booth limits, and platers with tank size, so a long railing or a heavy casting may need a different shop from a batch of small brackets. Give dimensions, weight and quantity when you request a quote so nobody guesses.
Ask about preparation, since the finish is only as good as the surface under it. Sand blasting, phosphate or chemical pre-treatment, masking of threads and the handling of rust are all worth raising before you commit. Providers that publish their prep steps, as several here do, are easier to compare.
Be specific about standards and paperwork. If your work calls for a named specification such as an anodising or plating standard, ask the firm to state exactly what it applies and what report it can give. Any certification a provider mentions is its own statement, so ask for the certificate and check it.
Compare quotes on the same brief, including colour or plating thickness, turnaround, transport and rework terms. Ask what happens if the finish fails inspection, how finished items are packed, and whether the shop can supply a sample first. A quote from a shop that has not seen your part is only an estimate.

Update history

Published 13 Oct 2026. No changes recorded since.

About the author

Amir Wahab

Founder and Editor

Amir Wahab is the founder and editor of LocalRank, an independent Singapore rankings and local guides publication.

Report an error on this page