10 Best Epoxy Flooring Contractors in Singapore
Established contractors for epoxy flooring in Singapore - home and HDB floors, metallic finishes, car parks and industrial coatings, each verified via its site.
- Edited by
- Amir Wahab
- Published
- Reading time
- 4 min read
AI image by LocalRankOnce confined to grey warehouse bays, epoxy flooring in Singapore now runs from metallic, marble-effect home surfaces to anti-slip car-park and factory coatings. This guide gathers ten established contractors - decorative residential specialists, all-round applicators and heavy-duty industrial names - each checked against its own website. Treat it as a vetted shortlist for comparing systems and requesting quotes, rather than a strict ranking.
1. Luminous Engineering
Luminous Engineering handles epoxy flooring across the full range of settings, from HDB and landed homes and garages to retail units, warehouses and manufacturing floors. Its menu covers self-levelling, metallic, anti-slip and flake systems, plus repair and refinishing of worn coatings. The company says it has over a decade in flooring and backs installations with warranties it describes as running from five to fifteen years depending on the system.
2. Galaxy Painters
Galaxy Painters offers one of the broader epoxy menus on this list, spanning metallic, self-levelling, self-dispersing, mortar, terrazzo, anti-static and flake systems for homes, HDB flats, shops and factories. It also lists quartz-sand and gravelled build-ups for anti-slip areas, alongside chemical- and dust-resistant coatings. The firm works from a base in Ubi and takes on both decorative residential jobs and hard-wearing industrial floors.
3. Metallic Epoxy Singapore
Metallic Epoxy Singapore (MESG) specialises in decorative metallic epoxy, producing seamless, marble-like and galaxy-style floors for BTO, resale and condo homes as well as offices. Beyond floors it applies the same resin to art panels, countertops, vanity tops and doors, and says it manufactures its own metallic epoxy products. It describes itself as a leading metallic-epoxy specialist in the region and offers a warranty registration for completed work.
Ang Mo Kio
Visit website ↗EmailView on map ↗
4. Obalay
Obalay, part of Intersurface, positions itself as a direct epoxy-overlay contractor whose seamless finishes - branded PebblePro+, Lastic, Ecoluxe and Nanocrete - go over existing surfaces without grout lines. It says its overlays carry water-resistant or waterproofing properties and can be finished anti-slip for wet areas such as HDB and condo bathrooms. The company states it offers a two-year guarantee against surface wear and works regularly with interior designers.
5. Deroots
Deroots focuses on epoxy flooring for homes and commercial units, covering kitchens, bathrooms, garages, basements and living areas with seamless, easy-clean finishes. It lists clear coatings for 3D effects and highlights abrasion resistance and protection against water damage. Operating from Upper Aljunied, the company advertises what it calls a lifetime guarantee on its work.
Upper Aljunied
Visit website ↗EmailView on map ↗
6. Epoxy SG
Epoxy SG covers residential, commercial and industrial floors, sorting its systems into self-levelling, metallic, flake, epoxy-mortar and polyaspartic finishes for different uses - from marble-effect home floors to heavy-duty factory and warehouse surfaces. It also offers concrete polishing and the surface preparation that a lasting coating depends on. The firm lists a base in Toa Payoh and pitches slip-resistant flake systems for garages, schools and healthcare settings.
7. Trion Industrial Services
Trion Industrial Services is an industrial-focused applicator that styles itself a floor-coating solution specialist, handling epoxy, polyurethane, self-levelling, chemical-resistant and cementitious screed systems. It gives particular attention to anti-static and ESD floors for cleanrooms, electronics and similar controlled environments, and lists work for factories, warehouses, laboratories and hospitals. Finishes range across satin and matt as well as anti-slip build-ups, in coating thicknesses it quotes at roughly one to three millimetres.
8. Polymer International
Polymer International is a long-running industrial flooring specialist that says it was founded in Singapore in 1989, applying epoxy and polyurethane systems under its own Polygard heavy-duty and Ecogard low-VOC lines. It states the Ecogard range is certified under the Singapore Green Labelling Scheme, and its work spans settings such as cleanrooms and car parks. The company operates from Kaki Bukit and serves mainly industrial and commercial clients.
9. MH Engineering
MH Engineering concentrates on industrial and commercial epoxy, coating warehouses, factories, high-traffic areas and car parks, with residential work also on its list. It offers smooth glossy finishes as well as textured aggregate build-ups for slip resistance, plus protective coatings and repairs to failing floors. Based in Jurong West, the company says its installations carry a workmanship warranty covering adhesion and coating performance.
Jurong West
Visit website ↗WhatsApp ↗View on map ↗
10. G8 Solutions
G8 Solutions rounds out the list as a floor-preparation and coatings contractor whose services run from floor grinding and self-levelling cement to epoxy coatings, polyurethane screed, seamless floors and concrete polishing. That grinding and levelling capability means it can prepare an uneven or contaminated substrate before a coating goes down, which is often where epoxy jobs succeed or fail. The company describes itself as a one-stop provider for commercial and residential projects and works from Yishun.
How to choose
- Match the system to the space: metallic and self-levelling epoxy suit decorative home and retail floors, while epoxy mortar, PU screed and anti-slip or ESD systems are built for warehouses, kitchens, car parks and cleanrooms - ask which the contractor genuinely recommends for your traffic and use.
- Ask how the existing floor will be prepared, since grinding, crack repair and moisture control before coating are what stop epoxy from peeling or bubbling later; a contractor that glosses over surface preparation is a warning sign.
- Get the warranty in writing and confirm exactly what it covers - adhesion, delamination or workmanship - and for how long, as several firms advertise multi-year or 'lifetime' guarantees whose terms vary widely.
- For industrial or wet areas, confirm slip resistance, chemical resistance and the cure time or downtime involved, and check any relevant credentials such as bizSAFE or Green Label where they matter to your site.
- Request an itemised quote covering surface preparation, number of coats, thickness and reinstatement, so quotes from different contractors are genuinely like-for-like.
. No changes recorded since.
Founder and Editor
Amir Wahab is the founder and editor of LocalRank, an independent Singapore rankings and local guides publication.
Read next
9 Best Demolition and Hacking Contractors in Singapore (2026)
Nine demolition and hacking contractors in Singapore for HDB, condo, landed and shop jobs, with the hacking, dismantling and reinstatement work each lists.
By Amir Wahab7 min read
8 Best Stone Countertop Suppliers in Singapore (2026)
Eight stone countertop suppliers and fabricators in Singapore for quartz, granite, marble and sintered stone kitchen and vanity tops, with how to choose.
By Amir Wahab6 min read
9 Best Metal Fabrication and Welding Companies in Singapore (2026)
Compare 9 metal fabrication and welding companies in Singapore for stainless steel, mild steel and aluminium work, from home gates to shop fittings.
By Amir Wahab7 min read
10 Best Home Inspection Services in Singapore (2026)
Ten Singapore firms that inspect BTO, condo and resale flats for defects before move-in, covering DLP checks, developer liaison and re-inspection.
By Amir Wahab7 min read