8 Best 3D Printing and 3D Modelling Courses in Singapore (2026)
Compare 8 3D printing and 3D modelling courses in Singapore for adults and teens, from Fusion 360 and Blender to Tinkercad, with funding schemes named.
- Edited by
- Amir Wahab
- Published
- Reading time
- 6 min read
AI image by LocalRankLearning to design and print in 3D in Singapore now ranges from two-hour taster workshops to two- and three-day courses that cover CAD, slicing and hands-on printing. The courses below teach Fusion 360, Blender or Tinkercad, and are run by private training centres, polytechnic continuing-education arms and enrichment providers. Course names, durations, software and funding schemes come from each provider's own page, so treat this as a shortlist rather than a ranking. Intakes and subsidy rules change often, and eligibility is decided by the provider and the funding body, so check the live schedule and your own eligibility before you pay. Compare what each course actually prints, models and teaches before choosing one.
1. Tertiary Courses (Tertiary Infotech)
Tertiary Courses is the training brand of Tertiary Infotech Academy, and its Woodlands classroom hosts a WSQ Product Design with Fusion 360 course listed at beginner level. The page describes two days and 16 hours covering CAD fundamentals, sketching, solid modelling, assemblies, rendering and product simulation, followed by a two-hour assessment. It names WSQ funding, SkillsFuture Credit, PSEA, UTAP and SkillsFuture Enterprise Credit, and says eligibility is subject to verification. The site also describes the centre as an Autodesk Authorised Training Center and posts weekend and weekday dates running into 2027. Ask the provider which printing or follow-on modelling classes run after the Fusion basics, since this entry covers the design course only.
2. BELLS Institute for Higher Learning
BELLS Institute for Higher Learning runs a three-day 3D Printing Essentials course that its page says is co-delivered with Think Design Make, a Singapore 3D printing solutions provider. Over 24 classroom hours, learners sketch in Autodesk Fusion, slice in Bambu Studio and print on a Bambu Lab A1 Mini, with a generative AI step for turning sketches into models. The listing says no design background is needed and that participants take home their prints. It describes the course as WSQ-funded with a SkillsFuture Statement of Attainment and names UTAP for NTUC members. Because the site stresses hands-on time on a consumer-grade printer, it suits beginners who want to finish with a physical product rather than only screen exercises.
3. Ngee Ann Polytechnic CET Academy
Ngee Ann Polytechnic's CET Academy offers Introduction to 3D Printing, a one-day, eight-hour classroom course run by its School of Engineering. According to the course page, the syllabus covers FDM, SLA and SLM processes, design for additive manufacturing, CAD preparation in Fusion 360, slicing and printing on an Artillery Sidewinder, post-processing and a demonstration of the 3D scanning to CAD to printing workflow. It names SkillsFuture Credit, SkillsFuture baseline funding, the Mid-Career Enhanced Subsidy and Enhanced Training Support for SMEs, with eligibility decided by the school. As a single-day course taught on the polytechnic campus, it is a low-commitment starting point for adults who want an overview of printing technologies before choosing a longer modelling course.
Clementi (Ngee Ann Polytechnic)
Visit website ↗EmailView on map ↗
4. Temasek Polytechnic (Temasek SkillsFuture Academy)
Temasek Polytechnic lists Basic Computer Aided Design (CAD) 3D Modelling and 3D Printing among its SkillsFuture Series short courses. Across two eight-hour days, participants use CAD software to design parts with extrusions, cuts, rounds, chamfers, patterns and assemblies, convert files for printing, slice them and print their own model, with web-based CAD alternatives and selected AI design tools introduced as well. The page says participants visit the polytechnic's 3D printing labs to see 3D scanners and metal printing systems, and names hobbyists, students and operations staff among the intended audience. A TP certificate is awarded for at least 75 percent attendance and an assessment attempt, making it a practical pick for learners who want a CAD-first route into printing.
Tampines (Temasek Polytechnic)
Visit website ↗View on map ↗
5. MAGES Institute of Excellence
MAGES Institute of Excellence, based near Somerset, lists a one-day Fundamentals of 3D Modelling workshop that teaches Blender alongside Unreal Engine, which points it towards game assets and visual media rather than engineering parts. The page describes a Saturday, eight-hour session in which learners model and texture a simple prop or architectural piece, then import it into a game engine with basic lighting. It sets a minimum age of 18, asks for a laptop no older than 2017 and names SWDA, SkillsFuture Credit and UTAP grants. Intake dates showed as to be confirmed when checked, so confirm the next session first. Its enquiry form also lists a youth programme for ages 11 to 17.
Somerset / Orchard
Visit website ↗EmailView on map ↗
6. Learners Hub
Learners Hub, a training provider near Tai Seng, runs a WSQ Additive Manufacturing and 3D Printing course over two days, listed as 16 hours including assessment. The overview says it introduces the development of additive manufacturing, common technologies such as FDM and SLA, design for additive manufacturing principles, software used for 3D modelling and data preparation, and ways to troubleshoot and tune a print. Assessment combines a written exam and a practical, and the page says successful learners receive a SkillsFuture Singapore Statement of Attainment. It states that subsidies apply to Singapore Citizens and Permanent Residents aged 21 and above. The tone is industry and process rather than hobby making, so it fits engineers, operations staff and designers.
7. Tinkermind
Tinkermind is a maker and STEAM education provider whose 3D Printing Class is a two-hour introduction held on Aljunied Road. Participants learn Tinkercad, a free cloud-based modelling tool they can keep using at home, get hands-on time operating a 3D printer and take home a customised printed model. The company's site says it runs maker programmes in schools, libraries and companies, and a testimonial from a secondary school describes lower secondary students using Tinkercad in a workshop. That school-facing background makes it a sensible option for teens and parents who want a short, low-pressure first session. The class page does not state an age range, so confirm suitability with the provider directly before you book a seat.
8. ADA Tuition and Enrichment Hub
ADA Tuition and Enrichment Hub, an enrichment and tuition centre, runs a two-hour 3D Printing Workshop at its Bukit Batok branch only. The page labels it a STEM workshop for ages 12 and above and says it suits teens, families and curious adults with no experience. Participants use MakerBot's cloud software to design and slice a first model, operate a MakerBot Sketch Sprint printer and take home the print. Sessions are scheduled on the last Saturday of each month, with October, November and December 2026 dates listed when checked, and the page mentions group discounts and private events. Treat it as an entry-level taster rather than a full CAD course, and check the page for the current schedule before booking.
Bukit Batok
Visit website ↗WhatsApp ↗EmailView on map ↗
How to choose
- Decide whether you want to print or to model. Courses built around a printer, such as the BELLS and Tinkermind sessions, put hardware in your hands, while Fusion 360 or Blender courses spend most time on design. Check the course page for the software taught and what you actually print or export.
- Match the software to your goal. Fusion 360 suits functional parts and product design, Blender suits characters, props and game assets, and Tinkercad is a gentle starting point for beginners and younger learners. Learning the right tool first saves repeating a course later, so read the syllabus rather than the title.
- Look at the funding schemes each page names, such as SkillsFuture Credit, WSQ, UTAP or PSEA, but treat them as eligibility rules rather than promises. Subsidies depend on age, citizenship, employer status and attendance requirements, so confirm your own eligibility with the provider and the funding body before paying anything.
- Check length and level against your time. A two-hour taster, a one-day overview and a three-day course with an assessment suit different learners. Look at stated prerequisites, whether a laptop is required, and whether certificates need minimum attendance, then pick the shortest format that still covers what you want to do.
- Confirm live details directly. Intake dates, venues and age limits change, and some pages showed dates as to be confirmed. Contact the provider to check the next session, class size and whether teens may join, and consider polytechnic continuing-education arms alongside private centres when comparing similar courses.
. No changes recorded since.
Founder and Editor
Amir Wahab is the founder and editor of LocalRank, an independent Singapore rankings and local guides publication.
Read next
5 Best Tamil Classes in Singapore (2026)
Looking for Tamil classes in Singapore? Compare five providers for children and adults, from PSLE tuition centres to online and onsite adult Tamil courses.
By Amir Wahab4 min read
7 Best Spanish Classes in Singapore (2026)
Compare 7 Spanish classes in Singapore for adults and students: group, private and online courses plus DELE exam prep, as each school describes them.
By Amir Wahab5 min read
10 Best Secondary School Tuition Centres in Singapore (2026)
Compare 10 secondary school tuition centres in Singapore for O-Level and N-Level prep, with subjects, class formats and locations each centre publishes.
By Amir Wahab7 min read
6 Best Primary School Tuition Centres in Singapore (2026)
Compare 6 primary school tuition centres in Singapore offering English, Maths, Science and Chinese from P1 to P6, with PSLE preparation across the island.
By Amir Wahab5 min read